Time
3 hours 35 minutes
Difficulty
Intermediate
CEU/CPE
4

Video Transcription

00:00
Hello there and welcome to this Cisco CC and we switched 301 15 example. Of course. My name is Philip Pension Ali on in today's episode will focus on normal extended villains on voice villains know within a switch. We are various types of villains which we can use. In the previous episode, we looked at how we would set up a villain.
00:19
Well, the fact of the matter is,
00:20
that alone, which we set up, actually falls within the range of a normal villain.
00:26
In most cases, you would use normal villains. If you're using just under 1000 or so violence, then you would use normal villains.
00:35
And when you start to scale, pass 1000 villains, then you're gonna have to use extended violence. Extended villains fall within the range off 1006 to 4094 on voice. Villains would be useful when you have, like, I p phones connected to your switches.
00:52
This is quite the phones usually marks their own traffic, and they have like additional ports for you to connect the user specie.
00:59
Oh, it's always recommended to give high priority
01:02
your voice traffic so you would want to separate your voice traffic from your data traffic on within the switch, we can actually assign the voice traffic the voice villain
01:12
under the same time,
01:15
we can also same a date, a villain for the PC traffic that is also connected
01:19
to the same port. So this is the only time he would have an access port, which carries two villain one for the voice over i p phone traffic on one. For the data traffic coming from the PC, normal villains fall within the range of one. The 1005 no whatsoever
01:37
villain. One is the default villain
01:40
on violence 1000 and 2 to 1005. Our reserve villains,
01:46
meaning they do not support eating it on their dear by default in the switches.
01:51
So the only villains you can create within the switch our reliance to
01:56
the 1000 and one extended range villains
02:00
are between 1006 to 4094 north. However, by default, you can't create an extended villain
02:07
unless the switches runnin VTB version tree
02:13
and he would have to set the mode the primary. Another possible solution to run extended villains would be to set the v T p. Mood The transparent
02:22
steps to create an extended villa.
02:24
You would want the very fight existing villains with a show Phelan, commander show villain brief.
02:30
And then you would issue the command villain and specifying the villain i d from within global configuration. Mood voice villains, on the other hand,
02:38
well within the ports of configuration level, you would see the common switch Port Voice villain, and he was specified. The voice will an I D on. In order to verify which voice villain is set up on a particular port, you can use a command show interferes when he was arrested by the port number
02:57
followed by the keywords switch port and you can pipe output. They include voice
03:01
No, the voice starts with a capital V
03:05
on. This would show you right off the but which wise villain is currently set up
03:09
for the particular access port.
03:12
I'm gonna bring up a love so we can see how we would set. It's up in a switch Here in the savory lab,
03:17
we see the show villain Brief command.
03:21
We can see all of the villains as I mentioned earlier, and the slight the default villainous villain one
03:27
unreal and 1000 to the 1005
03:30
Our reserve on a nerd. A status column
03:34
Villain 2 2005 It stays unsupportive.
03:38
So if I tryingto site one of these villains
03:40
a particular port,
03:45
here we go. We can see a nice little warning. Tell us the port would not be ableto work because it's a non eating that villain, So I'm going to remove this. Come on,
03:53
however, wanted to create an extended villain. As you mentioned on the slate, the switch will give us an arrow.
04:00
What? We haven't received errors yet, but as soon as I exit out of this villain database configuration mode,
04:08
we get up. Nice Era, which I was talking about,
04:11
failed to create the villain because extent villains are not allowed in the current re TV mood. If I exit out of here,
04:18
you'll notice the villain is nowhere inside of the villain data bees. So we have the options of ADA running
04:26
switch and GTP version free
04:28
or changing the VT mode. The transparent, in order to use extended range balance, will cover V T P. In the next episode, everyone assign a port the voice villain
04:39
in this case and white court to connect some 84 on the fast Internet one. There are 12 interface
04:46
sorry going to global conflict. I would want to make the pork and access port but also want Assign a date a villain
04:53
that is, sport
04:55
the largest together message because the villain was not into the villain database. So it created a feelin for us. Note. However, if the switch was in a different BTP mode,
05:04
such a client you would get an era. When you try to create a villain
05:09
in the V T. P client mode,
05:12
however,
05:13
the switch is running in the VP sophomore.
05:15
More on this in the next episode
05:16
for no, you know, a sane
05:19
The voice is real and we will do switch sport
05:23
voice
05:25
and then the music. He worked villain
05:29
and it specify
05:30
the villain,
05:31
which we wanted a kid or a voice traffic.
05:34
Likewise, we got a nice message telling us that the villain is being created, and here we can see the voice villain has been set up
05:42
another way. The very fight
05:44
which voice villain is a saint or port
05:46
would use the command showing the face on any music you are sweet sport
05:50
on would fight this,
05:53
including keyword voice
05:56
on Dear You have it,
05:57
we can see right away.
05:59
Which boys Villain has been a sign that this specific port
06:05
on these Arctic on things which would assign on Knox a sport
06:10
this export access villain common, is for the data profit
06:15
on the switchboard voice villain. Common is for the voice traffic. All right, let's go back to the slides.
06:20
We have a post assessment question. Which command creates a voice villain under an inter fees? A. We go into the ports up conflagration mode. Andi Sudha commanders reach port access. We landed. We specify the villain I t or B. We go into the ports up configuration mode and we see the command switch Port Voice villain on Specify the voice Will and I. D
06:41
or a C.
06:42
We're going to the ports of configuration mode on Easter to come on. The switchboard voice on specified I D For the boys villain.
06:49
The answer is B from within the ports up configuration mode. We would issue the command switch sport voice villain on specify
06:59
the voice villain. 80
07:00
in there is lecture we worked with here is villain types.
07:04
We looked at
07:05
normal relations, extended villains on also voice villains. Before it's look at how we would set up extended villains we saw. It's similar to that of setting up a normal reeling with additional requirements of the switch bean in Adolf BTP Abortion tree or the switch running in the teepee transparent mode.
07:25
And finally we looked at how we would set up a boy's villain at a port stop configuration level. In the next video
07:31
will switch our attention. The VT P. We will look at how we would set up three deep in a switch along with a VTB pruning future. My name is Phil intentionally. I want to thank you for choosing savory.

Up Next

CCNP Switch - 300-115

This course is engineered to prepare you for your CISCO Certified Network Professional CCNP Switch 300 - 115. In this course, we will cover all the main domains present in the current version of the CCNP Exam which are centered around infrastructure security and services and layer 2 technologies.

Instructed By

Instructor Profile Image
Philip Inshanally
Network Administrator
Instructor