Time
3 hours 35 minutes
Difficulty
Intermediate
CEU/CPE
4

Video Transcription

00:00
Hello there and welcome to this Cisco CCMP switch 201 15 example. Of course, my name is Phil. Attention. Early on in today's have the sword will focus on Breeland databases are we often use villains.
00:11
We're gonna switch network with separate our traffic. A villain or a virtual one
00:16
breaks up a single broadcast Dominion
00:20
in the smaller broadcast. No means, which effectively reduces the size of a broadcast. Omen on traffic, are only switched between ports within the same villain. By default, you would usually map a villain
00:33
just suddenly.
00:35
Not when traffic needs to leave a villain. It would usually send the traffic days gateway off times. You're going to see that end devices I p addresses for Gateway Points the server, which then would send its traffic its default gateway. We could usually be a rotor or a waitress, which, however,
00:54
in some cases
00:55
you could also see in the end the face is there. Give baby address Point star OTA Aurilia tree switch directly.
01:03
No, when we're working villains, we were one of you exist in villains. We would use the command show villain or show well and brief
01:10
on from within global configuration mode. We would issue the command villain and we were specified the villain I D
01:17
that we want to create
01:18
optionally. You can give the villain and name.
01:21
For example. Let's say you create. We left 10.
01:23
You were the same. The names such as a Contin or marketing
01:27
I need to switch supports wrote in such as Layer Tree switches.
01:32
We can create what is known as I wrote it will interface from Global Configuration Ward.
01:38
We would do interface villain on. We would specify the villain i d.
01:42
This would create a road it real on, interferes,
01:45
and then we can go ahead and saying an I P address similar to that of a road. It's physical interferes,
01:51
not in some high end switches. When you create a road, it interferes and the face is shot down by default.
01:57
However, in these catalyst story 700 series switches,
02:00
the road it interferes would be enable my default. If we want to remove a villain once, we would have very fight existing villains. We will go into global configuration mode and we see the command no villain on. We would specify the villain lady. This would remove the villain. I'm gonna bring up a lot so we can see how we would work with Dylan when we can switch the environment
02:22
here in the savory love.
02:23
First we want of you the existing villains. So I'm gonna do show villain partly can see three villains. I can also show feeling grief.
02:32
And this gives a much cleaner output,
02:35
Not a way of, you know, Villa. I can specify which villa I want to look at by using a show villain Ivy. Common on. Specify an I. D.
02:45
This is gonna give me specific details
02:47
for this particular villain.
02:50
I never want to create my own villain.
02:52
Only thing global configuration would,
02:53
I would say, a villain. And then I would give it a villa 90. I've just created a villain.
03:00
No, I can assign a name to the villain.
03:07
Every line is not showing up. How we need to exit
03:12
the Regal.
03:14
Now we can see we have just created
03:15
real authority.
03:16
You see the name which we assign off sales? No, Let's take it. Step order by creating eroded villain into fees. So Politan Global configuration mood. First, let's check the existing rocket into this
03:30
here we can only see real and one
03:32
So I'm gonna create eroded villain interferes for real and purity.
03:38
You know this Wake up the butt.
03:40
The villain in the piece For real and perky she injured state toe up. No way can a sane I digress.
03:55
Awesome. Now we can see the villain Turkey in the piece showing up.
04:00
You can see the idea. Dress a sign.
04:02
Oh, you can see the administrative state is all
04:06
on a plane. Protocol is also which is what we want to see in most environments
04:13
anything we see
04:14
either of this showing us. No,
04:16
that's a red blood. And we would need itself the shoot.
04:25
No, If I want to remove a villain, I would simply go back in the global configuration more.
04:31
And it was easy to come on. No,
04:38
And that would remove villain 20 from the villain Mirabilis.
04:45
And as you can see, Wieland went there is no longer showing up.
04:49
Oh, yeah. Nice little message telling a villain 20 not falling in. The coroner will indeed, Always Additionally, when you're working,
04:57
I wrote it in the face within a little crease, which
05:00
and you're creating fear is well out into pieces. It's a good idea. The check you wrote in was being enabled
05:09
on in disc Is Broken is enabled,
05:12
my dear. For some instance, roping was not enable in this layer tree switch. It would simply go into global configuration mode. And he said the command I D wrote him
05:21
on that Dornan rode in
05:24
globally
05:25
on Enabled Earlier Crease, which to do roadkill
05:29
between various layer tree interferes is such as physical interferes is
05:33
in addition,
05:34
the villain Roque. It interferes is
05:36
just keep that in mind whenever you're working with liver tree switches on when you're finished working with the late tree rooted villain in the face,
05:45
you want to remove not enough eels,
05:47
like in our case, we have the veal and 30 wrote it in the face, would simply go into global conflict
05:54
and say no interferes villain
05:57
authority,
06:00
and that would remove eroded villain into fees.
06:05
All right, let's go back to the slides.
06:08
We have a post assessment question, which command removes a villain in. He's a
06:13
well, we think global conflagration mode. We go into the Interferes villain sub configuration mode on the city, Commander removed
06:19
or a B o I think global configuration would,
06:23
he said. The command No interference villain and specified the villain 80 for the layer tree villain interferes or a C only thing. Global configuration. Would we go into the interfere subcontract oration with for the villain interferes Andi, See the common villain remove.
06:39
The answer is B from within global conflagration mode. We will issue the command No in the face villain on the specified the villain 80 for the villain in the face, which we would like to remove
06:51
in the day's lecture. We work with the villain database. We looked at a Korean villains on. We even created our own villain on gave it an intuitive name.
07:00
After this, we would have created a little tree well and interference on assigned an I P address.
07:06
Next, we look at how we would remove a villain from the villain Davies.
07:11
And finally, we look at how we really remove
07:14
a layer tree. Villain wrote it into this.
07:16
In the next video, we'll continue our journey with villains On the focus will be on normal extended villain Envoy's villain. This is Phillip mention Ali gonna want thank you for choosing savory

Up Next

CCNP Switch - 300-115

This course is engineered to prepare you for your CISCO Certified Network Professional CCNP Switch 300 - 115. In this course, we will cover all the main domains present in the current version of the CCNP Exam which are centered around infrastructure security and services and layer 2 technologies.

Instructed By

Instructor Profile Image
Philip Inshanally
Network Administrator
Instructor